Balboa BP7 Spa Control 4.0kW Flow Thru Heater - G6405

Balboa BP7 Spa Control 4.0kW Flow Thru Heater G6405
The Next Generation of Balboa BP Hot Tub Control Systems is finally here.

With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand’s non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.

Features:

Supports all TP and SpaTouch topsides
Supports all BP ancillary products (ControlMySpa, BBA, CZ, and Status Pro)
Plug-N-Click Heater
WiFi Included

Kit Includes:

G4361 - Balboa BP7 System with 4.0kW Heater
57238-01 - Balboa TP500 Panel, Less Overlay
17183 - TP500 Panel Overlay (6-Button, Rectangle)
25098 - Wire Assembly, 8ft for spa light
15480 - Panel Bezel (Adapter Plate)

-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa

-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel

*Both the Circ pump and Ozone can be converted to 120V, however, they will be the same voltage after conversion. (Both 120V or both 240V.)

*If a 24-hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos, or Waterway Tiny Might pumps do not perform at this rate and cannot be used.

Additional Information:

System Voltage 230V
Heater Type Flow Thru
Heater Wattage 4.0kW
Keypad Included Included
Supports Pump1 + Blower/Pump2

Alternate Part Numbers
54219
54216
54217
54220
VS300
VS500Z
VS501Z
VS501SZ
VS503SZ
VS504SZ
VS510SZ
VS510DZ
VS511Z
VS511SZ