EcoOne Pool and Spa Pre Filter

MSRP: $79.99
Your Price: $48.99
(You save $31.00 )
EcoOne Hose Pre-Filter

EcoOne advanced purification HOSE filter solves most  spa startup  water issues without the use of chemicals by removing or reducing most common water contaminants before they get into your spa. This filter has many other  applications like pond pre-treatment, birdbaths, pet water, fish tanks, lawns, car washing and more. The convenient design attaches to any standard garden hose. 
Solves most initial Spa water problems caused by:
- Dissolved heavy metals
 - Lime and Scale
 - Organic contaminants and VOCs
 - Hydrogen Sulfide (rotten egg smell)
 Plus hundreds of other common water contaminants!
EcoOne Pre-Filter Technical Specifications
The ecoONE Hose Filter solves most startup spa and pool water problems without the use of chemicals. Saves money time and hassle by removing or reducing most common water contaminants before they get into your pool or spa.
The ecoONE Hose Filter has hundreds of other useful household applications for flower and vegetable gardeners, pond pre-treatment, bird baths, pet water, fish tanks, lawns, car washing, etc.
The convenient design will work on either end of a standard garden hose.
Technical Data:
 When tested against the National Sanitation Foundations Standard No. 53 Drinking Water Treatment Units Health Effects, the ecoONE Hose Filter water treatment unit met all requirements of the standard.
Filter Media Test:
 Input turbidity: 12 TU
 Effluent turbidity: Initial: 0.8 TU
 Effluent turbidity: 50%: 0.9 TU
Unit test:
 Model: ecoONE Hose Filter
 Capacity: Up to 40,000 Gallons (depending on source water quality)
 Flow Rate: 2 GPM
 Temp range: 35F-100F
 Working pressure range: 20-100 psi
The ecoONE Hose Filter is a combination of granular activated carbon (GAC) and a patented reduction/oxidation media that is classified by the EPA as a bacteriostatic. The combined media reduces or eliminates these contaminants:
Heavy Metals:

 Chromium VI
 Chromium III
Other Contaminants:
Volatile Organic Contaminates (VOCs)

 Hydrogen sulfide
 Chlorine and its byproducts (THMs)

The ecoONE Hose Filter has been tested to applicable NSF 42 & 53 standards by an independent lab to reduce and/or eliminate all contaminants listed. There are hundreds of other contaminants that the filter reduces and/or eliminates.
Calcites and lime/scale:
 The ecoONE Hose Filter alters the molecular structure of calcite which inhibits its clinging capability. Calcium ions are removed from the water which changes calcite lime/scale deposits into aragonite. This alteration causes the lime/scale to remain suspended in the water where it cannot cling to equipment.
All materials used in the ecoONE Hose Filter are approved by the FDA for contact with foodstuffs including potable water. All thermoplastic/thermoset plastics used comply with the NSF standard 14.
Directions For Use:

Flush garden hose before use to remove sediment and contaminants.
Attach filter to hose and flush for one minute until water runs clear. Can be used effectively at either end of the garden hose.
Can be used with a sprayer attachment or sprinkler with a barely noticeable reduction in flow rate.
Save end caps for storage. STORE WET!
Do not allow filter to dry out as the media will harden and become ineffective. If end caps are lost, store in a plastic baggy in refrigerator.
Works best with a flow rate of 2GPM or less. For highly contaminated water, reduce flow rate to 1GPM.
If flow rate slows, back-flush filter to remove sediment buildup.
If its not possible to back-flush filter, place female end in a bucket of clean water and shake to loosen blockage from media.

Test Hose Filter for exhaustion:

Attach the unit to a source of chlorinated water and test the output with a chlorine test strip, readily available at any pool and spa supply store. Chlorine level should read at or near 0. Your Hose Filter will last between 8,000 and 40,000 gallons, depending on care, use and initial water contamination.

Technical Specifications:
Appearance: 2.5 x 10 with FPT inlet/outlet
Weight: 1.25 Lbs.
Flow Rate: 2 GPM
Temp Range: 35F 100F, working pressure range of 20-100 PSI
8,000 - 40,000 gallons
Handling and Storage:
Store in a cool, dry place. To maintain product quality keep filter media wet and replace end caps after use., Do not expose to extreme temperature fluctuations, allow the product to freeze or be exposed to prolonged temperatures in excess of 100º F.

This pre-filter is not meant to be used to purify everday drinking water.