Balboa BP7 Spa Control System With Heater and Topside Control Pad
Balboa BP7 Spa Control Systems are An Excellent Replacement For Balboa VS, BP, and EL systems
Specifications:
Voltage: 115v / 230v Single Phase
Heater KW Rating: 4.0kw or 5.5Kw
Heater Dimensions: 15" (Steel Flange to Steel Flange) 2" Outside Diameter
Control Box Dimensions: 11.50 H x 12.64 W x 4.80 D
Has Keypad: YES
Can Support Multiple Pumps YES
Wi-Fi Ready, (Sold Separately)
Does Not Come with Cords for Pumps and Blower
Configurations:
Pump 1: 115v or 230v (1 or 2 Speed Pump)
Pump 2: 115v or 230v (1 or 2 Speed Pump)
Pump 3 or Blower: 115v or 230v 1 Speed
Circ Pump Circuit: 115v or 230v Circulation (Requires 23 GPM)
Ozone Circuit: 115v or 230v Controlled By Filter Cycle
AV Circuit: 115v or 230v For Stereo/Video
Light Circuit: 12v LED Color Rotation
Keypads: TP500 (6.32" x 2.25"), TP600 (7.1" x 3.5"), TP700 (10" x 3.5")
Titanium Heater: 115v or 230v - 1.0KW or 1.5KW (115v) - 4.0KW or 5.5KW (230v) - (Fixed)
Temperature Sensor: Heater Mount Auto Reset
Overheat Sensor: Heater Mount Auto Reset
Wi-Fi Ready: Requires Module 50350
Warranty: 2 Years
Important Notes:
This is a programmable system that can be configured several different ways.
The default is "Set-up 21" which is setup to run (1) Dual Speed Pump.
Instructions to change the settings are included.
Requires using the included Y Splitter if configuring PUMP #4
All circuits ship at 230 volts, please refer to instructions to convert a circuit to 115 volts.
If a 24 hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Product Features:
System supports keypad, heater, 12v light, as well as multiple pumps, air blower, etc.
M7 Sensor Technology, (No Pressure Switch)
Convertible to accept either 115v / 230v incoming electrical (Requires a Neutral)
Each output can be configured 115v / 230v.
AMP style connectors for quick secure connections.
Standard 4.0kw flow through style heater (Requires minimum of 23 GPM)
Temperature & high limit probes are built into and mounted on the heater.
Self diagnostic functions
Other options and systems are available. Please give us a call to discuss your exact needs.
